Click to Vist the J.E.R. Overhaul Website
newman machinery newman machinery
Download Equipment List (.pdf - Adobe Acrobat Format) | Download Equipment List (.doc - Microsoft Word Format)

*************** NEW ITEM ***************
Factory Remanufactured Nordco LS-1 Auto-Lift Automatic Rail Lifter
Contact the Sales Dept at 1-(800) 766-2180

New Hatz Diesel engine, rebuilt axles, drive motors, etc. Rebuilt remote adjustable plate pushing wands and cables, rebuilt hydraulic pump, oil cooler, new control panels. New work lights over both rails, Operation and parts manuals. Six month, 1000 hour (which ever occurs first) Standard Warranty. Approx. Dimensions: L. 7’8”, W. 6’8”, H. 7.8”Wt. 4,100 lbs. F.O.B. Oak Creek, WI.
PHOTOS
*************** NEW ITEM ***************

TAMPERS

Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
1999 Model, Equip# TP-2760, Ser#7191749, Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, System-V Version V4.10 control system, Release 4, Surface fit, Smart I/O, Work-head depth control kit. Laser alignment system. Has Clark two speed powershift transmissions for shifting “on the go”, four wheel drive, inside hand rail kit, rapid de-ployment buggies with “air lock” pins, Visionaire hydraulic air conditioning system, insulated. Recently rebuilt combo clamp assembly, rebuilt workhead frames, new pumps and jack cylinders, one rebuilt transmission. All work completed 3/2006 by JER.. Automatic guide rod oilers, work and travel lights, brake lights, air dryer, and air horn, recent paint. Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
1997 Model, Equip# TP-2910, Ser#7191287, Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, Upgraded to System-V Version V4.10 control system, Release 17, Surface fit, Work-head depth control kit. Smart I/O, dual reference lining system, Laser alignment system. Has Clark two speed powershift transmissions for shifting “on the go”. Inside hand rail kit, four wheel drive, rapid de-ployment buggies, air conditioning. Automatic guide rod oilers, work and travel lights, beacon, brake lights, air dryer, and air horn. Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
1995 Model, Equip# TP-3440, Ser# 7190815. Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, four wheel drive, combo clamps, Only 3,100 total hrs. since new! New 2007 System-V 4.10 Control System, Surface fit, Smart I/O, Production Reporting, Work-head depth control kit, Laser alignment system. Air conditioning system, automatic guide rod oilers, rapid deployment buggies, vandalism protection guards on windows, work and travel lights, beacon, dual air horns, air dryer. New paint! Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
1993 Model, Equip# TP-2535, Ser# 7190223. Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, four wheel drive, combo clamps. System-V 2003 Version 4.10, Release 17, Surface fit, Production Reporting, work-head depth control kit, dual lining receivers. Laser alignment system, raised floor kit, inside hand rail kit, Red Dot heavy duty air conditioning system, automatic guide rod oilers, rapid deployment buggies, (7) high pressure hydraulic filters, insulated!, work and travel lights, beacon, dual air horns, air dryer. Good paint! Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
1993 Model, Equip# TP-2450, Ser# 7190193. Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, four wheel drive, Updated with System V, Version 4.10, Release 17, Surface fit, Smart I/O, Workhead depth control, Production Reporting. Laser alignment system, raised floor kit, air conditioning, automatic guide rod oilers, tinted glass, rapid deployment buggies. (7) high pressure hydraulic filters. Work and travel lights, beacon, dual air horns, air dryer. Good paint! Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
1993 Model, Equip# TP-2530, Ser#7190173. Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, four wheel drive, combo clamps, Updated 7/6/2006 to System-V 2003 Version 4.10, Release 17, Smart I/O, Surface fit, Production Reporting, work-head depth control kit, air conditioning, West coast mirrors, raised floor kit, rapid deployment buggies, adjustable surfacing projector kit (Construction Buggy). Laser Alignment system, automatic guide rod oilers, work and travel lights, beacon, dual air horns, air dryer, fire extinguisher, good paint! Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark IV Switch/Production Tamper    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
1993 Model, Equip# TP-3335, Ser#7190063, Cummins 6CTA 8.3 Turbocharged 6 cylinder 230-hp diesel engine, System-V 2001 Version 4.10, Release 11, Smart I/O, Surface fit, Dual lining, Laser Alignment system, four wheel drive, rebuilt workhead assemblies, rebuilt combo clamps, air conditioning, automatic guide rod oilers, West coast mirrors, rapid deployment buggies, work and travel lights, beacon, dual air horns, back-up alarm, air dryer, fire extinguisher. New paint! Dimensions: (Approx.) L. 50’(w/folding buggy stored), W. 10’ 6”, H. 12’ in shipping position. Wt. 65,000 lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# TP-3460 1994 Model ECTR-130AG, Ser# 3594284, GM 4-71T Turbo Charged Diesel, Kato generator, two wheel drive, combo clamp, auto-graphliner, new style lift cylinders, hydraulic driven air conditioning. Laser Alignment System. Lights, wipers, beacon, air dryer, back-up alarm, heater, engine side covers. Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR SALE OR RENT - CALL FOR AVAILABILITY!
Equip# TP-3325, 1989 Model ECTR-130G, Ser# 3583459, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, good drive chains and drive sprockets, combo clamp, turntable, graphliner, good BTI tamping tools. Lights, wipers, beacon and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    PHOTOS    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# TP-3445, 1989 Model ECTR-130AG, Ser# 3583469, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, rebuilt workhead frames, rebuilt combo clamp assy., (2) rebuilt transmissions, new style Rexroth control valves, graphliner, new style lift cylinders, new style pendulum motors, Laser Alignment System available. Side mount Visionaire hydraulic driven air conditioning, turntable. Lights, wipers, beacon and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# TP-3535, 1988 Model ECTR-130G, Ser# 3583368, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, combo clamp, graphliner, new style lift cylinders, electric winch for projector buggy, new style pendulum motors, Visionaire rooftop hydraulic driven Air conditioning, Laser Alignment System available, lights, wipers, beacon, back-up alarm and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 11’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# TP-3450 1987 Model ECTR-130G, Ser# 3583127, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, combo clamp, graphliner, new style lift cylinders, insertion counter. Laser Alignment System. Air conditioning, lights, wipers, beacon, back-up alarm and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# TP-3455 1987 Model ECTR-130G, Ser# 3583147, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, combo clamp, graphliner, new style lift cylinders, Rapid deployment buggies, new style pendulum motors, insertion counter, engine side covers, insulated cab, Laser Alignment System. Side mount Visionaire hydraulic driven air conditioning, air dryer, lights, wipers, beacon, back-up alarm and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY-- CALL FOR AVAILABILITY!
Equip# TP-3530, 1987 Model ECTR-130G, Ser# 3582957, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, graphliner, Rapid deployment buggies, new style pendulum motors, insulated cab, Laser Alignment System. Side mount Visionaire hydraulic driven air conditioning, air dryer, lights, wipers, beacon, back-up alarm and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    FOR RENT ONLY-- CALL FOR AVAILABILITY!
Equip# TP-3525, 1986 Model ECTR-130G, Ser# 3582766, GM 4-71T Turbo Charged Diesel, Kato generator, four wheel drive, combo clamp, graphliner, Visionaire roof top AC, new style pendulum motors, jump seat, air dryer, lights, wipers, beacon, back-up alarm and heater, Dimensions (Approx.). L.48’ w/projector buggy attached, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper Mark III Switch/Production Tamper    PHOTOS    FOR SALE OR RENT ONLY-- CALL FOR AVAILABILITY!
1983 Model, ESTR-130G, Equip.# TP-2915, Ser# 3580863, GM 4-71T Turbo Charged Diesel, dual clamps, graphliner, lights, wipers, air horn. Dimensions (Approx.). L.40’, W. 10’6”, H. 10’6”, Wt. 62,000lbs. Located Arcola, IL
Fairmont Tamper ES-TDAG Mark III Torsion Beam Switch Tamper    COMING IN!
Equip# TP-3595, 1980 Model, Ser# 1085750, GM 4-71 diesel engine, dual clamp system, turntable. Located Arcola, IL
Fairmont Tamper ES-TDAG Mark III Torsion Beam Switch Tamper    COMING IN!
Equip# TP-3590, 1978 Model, Ser# 1075578, GM 4-71 diesel engine, dual clamp system, turntable. Located Arcola, IL
Tamper Corp. ES Switch Tamper    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip.# TP-3340, Ser#1089936, 1986 Model, GM 4-71T four valve head diesel, four wheel drive. Air conditioning, beacon, lights, side mirrors, air dryer. Good condition! Dimensions: L.21’, W. 10’9”, H. 10’8”, Wt. 35,000 lbs. Located Arcola, IL
Tamper Corp. ES Switch Tamper    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Mark II, Equip.# TP-2455, Ser#1089916, 1986 Model, GM 4-71 4 valve head diesel, Kato Generator, four wheel drive. Rebuilt workhead frames, etc. Beacon, lights, side mirrors, air dryer. Good condition. Dimensions: L.21’, W. 10’9”, H. 9’9”, Wt. 35,000 lbs. Located Arcola, IL
Tamper Corp. “E” Mark II Tamper  FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip.# T-3540, Ser# 688071, 1981 Model (Updated by UP in 2000), GM 4-71 4-valve diesel engine, no jacks, four wheel drive, new style (Mark III, Mark IV) lift cylinders, lights, wipers, beacon, mirrors, back-up alarm. Very nice machine! Dimensions: L.24’, W. 9’ 4” (steps can be un-bolted to make legal @ 8’6”), H. 9’6” ( w/o beacon). Wt. 34,200 lbs
Tamper Corp. EA Mark Tamper  PHOTOS  FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip.# T-3175, Ser# 676848, 1978 Model, GM 4-71 diesel engine, no jacks, two wheel drive, lights, wipers, strobe, mirrors, back-up alarm. Dimensions: L.22’, W. 9’ 2”, H. 10’11” (9’8” w/o exhaust pipe). Wt. 38,000 lbs. Located Arcola, IL
Tamper Inc. ST Junior Switch tamper    PHOTO    $16,500.00
Ser#1060087, 1967 Model, GM 4-71 diesel, traversing workheads, updated with air brakes! Open cab with roof. Engine and vibrators run good! Dimensions: (Approx.) L. 19’ 6”, W. 10’ 8”, H. 8’ 10”, Wt. 21,500 lbs. Located Arcola, IL. “As is, where is”
Tamper Corp. JR Junior Electromatic Tamper    PHOTO    CALL!
Ser#673091, 1971 model, GM 4-71, open cab design. Good little tamper for tie gang replacement, contractors machine for small sidings! Dimensons: (Approx.) L. 17', W. 8'3", H. 8', Wt. 16,000 lbs.Located Arcola, IL
JRM Junior Tamper    PHOTOS    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip.# T-2690, Ser#5180145, 1984 Model, 3788 hrs., GM 4-53 Diesel engine, hydraulic vibrators, open cab. Lights, beacon, back-up alarm, de-rail guards, air dryer. Good wheels and brake shoes. Designed for ease of maintenance! Legal width for transporting. Dimensions: (Approx.) L.23’, W. 8’ 6”, H. 9’ 6”, Wt. 18,000 lbs Located Arcola, IL
JRM Junior Tamper    IN SHOP!
Equip# T-3060, Ser#5180520, 1980 Model, 5528 hrs, GM 4-71 Diesel engine, hydraulic vibrators, enclosed cab. Rebuilt workhead frames, vibrators serviced and inspected. Lights, beacon, back-up alarm, de-rail guards. Good wheels and brake shoes. Designed for ease of maintenance! Great machine for working in tie gangs or crossing work! Legal width for transporting. Dimensions: (Approx.) L. 22’ 8", W. 8’ 2”, H. 10’ 4”, Wt. 18,128 lbs Located Arcola, IL
STM Junior Switch Tamper    PHOTOS    FOR RENT ONLY-- CALL FOR AVAILABILITY!
Equip.# T-2845, Ser# 5380615, 6285 hrs., 1985 Model, GM 4-53 Diesel engine, hydraulic vibrators, enclosed cab. Lights, heater, de-rail guards, air dryer. Good wheels and brake shoes. Designed for ease of maintenance! Great machine for working in tie gangs or crossing work! Dimensions: (Approx.) L.23’, W. 10’ 6”, H. 9’ 6”, Wt. 20,000 lbs. Recent paint! Located Arcola, IL
STM-XLC Switch Tamper    PHOTO    FOR RENT ONLY-- CALL FOR AVAILABILITY!
Equip.# T-2695, Ser# 5380434, 1984 Model, GM 4-71 Diesel, hydraulic vibrators, updated amplifer receivers, (Mark IV style) enclosed cab, semi-automatic operation. Designed for ease of operation and maintenance. New paint and glass. Dimensions: (Approx.) L. 25’ Basic machine, (32’ with front buggy on deck), W. 10’ 6”, H. 10’’6”, Wt. 32,000 lbs. Located Arcola, IL
STM-(JFLT) Switch Tamper    IN SHOP!
Equip.# TP-2865, Ser# 5380071, 1981 Model, GM 4-71 Diesel, hydraulic vibrators. The (JFLT) Junior Foreman light system has been removed. Machine will manually lift and line. Machine to be fully serviced, repaired as needed with new paint. Designed for ease of operation and maintenance. Dimensions: (Approx.) L. 25’ Basic machine, W. 10’ 6”, H. 9’’6”, Wt. 28,000 lbs
New Tamper Projector Buggy kits with lining cradle! Less wheels    PHOTO     $3,500.00


BALLAST REGULATORS / COMPACTORS

Knox Kershaw KBR-900 Heavy Duty Ballast Regulator,    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# BR-3040, Ser# KBR900-004-94, 1994 Model, Detroit 4-53T Silver Series Turbo Charged engine, operator’s cab tilts for ease of maintenance, Funk six speed powershift “on the go” transmission, air conditioned, 28” wheels with rebuilt wheel flanges, ballast wings 1.6 cu. yd. wings with articulated templates, turntable, mirrors, back-up alarm, work lights, strobe light, new brake shoes, new broom hoses Machine had a major rebuild as of 10/05. Very nice machine! Recent paint! Dimensions: (Approx.) L. 37’, W.10’ 7”, H.11’ 10”, Wt.44,000 lbs. Located Arcola, IL
Knox Kershaw KBR-900 Heavy Duty Ballast Regulator    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# BR-3420, Ser# KBR900-003-94, 1994 Model, Rebuilt Detroit 4-53T Silver Series Turbo Charged engine, operator’s cab tilts for ease of maintenance, Funk six speed powershift “on the go” transmission, rebuilt 28” track wheels, 1.6 cu. yd. ballast wings with articulated templates, turntable, roof mounted air conditioning, side mirrors, back-up alarm, dual air horns, wipers front & rear, work lights, strobe light, Dimensions: (Approx.) L. 37’, W.10’ 7”, H.11’ 10”, Wt.44,000 lbs. Located Arcola, IL
Knox Kershaw KBR-850 Heavy Duty Ballast Regulator,    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Equip# BR-2815, Ser# 045-850-01, 2001 Model, Detroit 40E, 210 h.p. engine, six speed power shift transmission, New one pass plow, ballast wings are full 36” wide with 1.5 cubic yard capacity, hydraulic controlled template doors, turntable, tinted windows remote engine filters, engine shutdown system, back-up alarm, fuel/water separator, strobe light, signal shunting system, insulated broom housing, broom deflector is 45 degree v-shaped for quick transfer of ballast to shoulders. Hydraulic driven McBone A/C, heater, pressurizer unit. Very nice machine! Recent paint. Dimensions: (Approx.) L. 37’, W.10’ 7”, H.11’ 6”, Wt.38,000 lbs. Located Arcola, IL
Kershaw 46-1-2 Ballast Regulator,    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Equip# BR-2805, Ser#46-154-83, GM 4-53T diesel engine, 175 h.p., hydrostatic 4 wheel drive, 4-speed transmission, One pass plow, 36 inch wide reversible wings hydraulically controlled from cab, hydraulic broom, hydraulic turntable, Dual operator cab, insulated cab with Air conditioning and heat. Dimensions: (Approx.) L. 32’, W. 11’, H.11’, Wt. 35,000 lbs. Located Arcola, IL
Kershaw 35-13 Tie Plate Sweeper    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# TPS-2885, Ser# 35-106-92, 1992 Model, recently rebuilt Deutz 3 cyl. F3L-912 Diesel engine, four wheel drive, 22 gallon fuel tank, work interrupt kit, Removes ballast and debris from the tie plate areas after new tie insertion in tie gangs. Dimensions: (Approx) L. 14’ 7”, W. 9’, H. 8’ 4”, Wt. 8900 lbs. Very good condition. New Paint!
Kershaw 26-3-1 Ballast Regulator        PHOTOS    FOR RENT ONLY!
Equip# BR-2975, Ser# 26-221-93, 1993 Model, GM 3-53T Turbo charged diesel engine, one pass plow, Visionaire hyd. driven air conditioning, hydraulic toe line templates, aux. oil cooler. Very good condition! Dimensions: (Approx.) L. 35’, W. 10’5”, H. 10’ 5”, Wt. 35,600 lbs. Located Arcola, IL
Kershaw 26-2-2 Ballast Regulator    PHOTOS    FOR SALE OR RENT - CALL FOR AVAILABILITY!
1991 Model, Equip# BR-2500, Ser# 26-1972-91, GM 4-53T Diesel engine, Funk transmission, hydraulic driven broom, heavy duty air cleaner and muffler system. One pass plow, good plow blades and good front skid, air conditioning unit, good broom hoses. Dimensions: (Approx.) L. 28’ W. 10’8”, H. 9’6” w/exhaust & air cleaner removed, Wt. 25,000 lbs. Good paint! Located Arcola, IL
Kershaw 26-2-2 Ballast Regulator        PHOTOS    FOR RENT ONLY! - CALL FOR AVAILABILITY!
1986 Model, Equip# BR-3290, Ser# 26-1906-86,GM 4-53 Diesel engine, Funk transmission, hydraulic driven broom, heavy duty air cleaner and muffler system. One pass plow, Red Dot air conditioning unit, 90% broom hoses. Dimensions: (Approx.) L. 28’ W. 10’8”, H. 10’6” w/exhaust & air cleaner removed, Wt. 25,000 lbs. Located Arcola, IL
CRANES / SPEED SWINGS / RAILCAR MOVERS

Swingmaster Model 181 Swing Loader    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip.#SS-3555, Ser#88181L0020, 1988 Model, Reconditioned 11/07, 10,000 lbs. lifting capacity, Rebuilt GM 4-53 diesel engine, rebuilt boom assy. with all new pins & bushings, six speed “powershift”, enclosed ROPS cab, jump seat, new joystick controls, all new wiring, new seat, all hydraulic cylinders rebuilt, new rooftop AC unit, hi-rail attachment, 9’6” tote hook, Sieb generator set w/ 30” magnet, optional hydraulic source on boom, mirrors, work & travel lights, 14:00 x 24 tires, new paint. Located Arcola, IL
FMC/Linkbelt HC48A Truck Crane    PHOTOS    $15,000.00
1979 Model, 20 Ton Lattice boom, diesel engines up (GM 3-53) and down (GM4-53), hydraulic outriggers, 2800 total hrs, Magnet (48” Delta Star, 230 volt, 50 cycle, Type DDLT, Amps 47, ohms 4.87, wt. 2,240 lbs.) and gen set, two extra boom sections, clamshell bucket. No hi-rail! Good condition! Located Arcola, IL
Galion 150A Rubber Tired Hydraulic Crane    PHOTOS    CALL!
#MC-7201, 15 ton (3) section boom, GM 4-53 Diesel, 14:00 X 24 tires fair to good, Hi-Rail system, car couplers both ends. Max radius 55 ft. Located Arcola, Illinois.
Pettibone 441-B Speed Swing    PHOTOS      FOR SALE OR RENT ONLY - CALL FOR AVAILABILITY!
Equip# SS-2925, Ser# 2293., GM 4-53 Diesel engine, hi-rail attachment, good wheel flanges and drive hubs, tote hook or long rail laying boom. Lights, turn signals, beacon, side mirrors. Good paint. Dimensions: (Approx.) L. 18’3”, W. 8’2”, H. 9’(with exhaust & air cleaner removed), Wt. 34,000 lbs. Located Arcola, IL
Pettibone Model 360 Boom (tote hook) attachment    PHOTO    CALL!
17 feet long. Located Arcola, IL
Pettibone Bucket, small style    PHOTO    CALL!
Fits all Pettibone Speed Swings. Located Arcola, IL


SPIKE PULLERS / DRIVERS

Nordco SS-B Spiker    FOR RENT ONLY-- CALL FOR AVAILABILITY!
Equip# SD-3285, 2006 Model, John Deere Diesel engine, CX Style Reciprocating Hammers with nippers, gauging attachment. Only 846 hrs. as of 1/7/08. A Modular design for simple operating and maintenance. Manual hydraulic controls improve reliability and troubleshooting! Machine has remote Hydraulic spike pattern adjustment, boom & winch for loading spike kegs, four wheel drive, turntable, Bumpers, tow bar with hitch pins, strobe light, work & travel lights, fire extinguisher, West Coast mirrors, bi-directional high & Lo tone horns, hour meter, cycle count and keyed ignition switch. Dimensions: (Approx.) L.18’, W. 8’ 6”, H. 8’6”, Wt. 17,700 lbs. Located Arcola, IL
Fairmont Tamper W96E-2-29 Spike Setter/Driver with Gauger    FOR SALE ONLY!
Equip# SD-3245, 1996 Model, Ser# 257119, John Deere Diesel engine, 5200 hrs. as of 12/20/05. This dual head spiking machine sets and drives line and anchor spikes on both sides of each rail. Dual controls allow either operator to propel and/or brake the machine. Joystick controls for both operators, deluxe seats and armrest for operator comfort and control. The perfect machine for rail relay operations. Major functions are controlled by a programmable logic controller (PLC). The spike drivers and gauger are all operated by the PLC. The PLC, with built-in diagnostics, uses analog sensors to precisely determine cylinder extension positions and is easily programmed for position adjustments through the operator interface. Has turntable, winch for loading spike kegs, dual air horns, side mirrors, bumpers, dual motion alarm, three man option, strobe, dual two way lights, cabinet lighting, audible low air pressure alarm, fire extinguisher and more! Dimensions: (Approx.) L. 25’, W. 9’ 6”, H.9’ 6””, Wt. 26,220 lbs. Located Arcola, IL
Fairmont Tamper W96E-2-29 Spike Setter/Driver with Gauger    FOR SALE ONLY!
Equip# SD-3250, 1996 Model, Ser# 257120, John Deere Diesel engine, 4104 hrs. as of 12/20/05 This dual head spiking machine sets and drives line and anchor spikes on both sides of each rail. Dual controls allow either operator to propel and/or brake the machine. Joystick controls for both operators, deluxe seats and armrest for operator comfort and control. The perfect machine for rail relay operations. Major functions are controlled by a programmable logic controller (PLC). The spike drivers and gauger are all operated by the PLC. The PLC, with built-in diagnostics, uses analog sensors to precisely determine cylinder extension positions and is easily programmed for position adjustments through the operator interface. Has turntable, winch for loading spike kegs, dual air horns, side mirrors, bumpers, dual motion alarm, three man option, strobe, dual two way lights, cabinet lighting, audible low air pressure alarm, fire extinguisher and more! Dimensions: (Approx.) L. 25’, W. 9’ 6”, H.9’ 6””, Wt. 26,220 lbs. Located Arcola, IL
Fairmont W113-E-1 Dual Spike Puller    FOR SALE OR RENT ONLY! -- CALL FOR AVAILABILITY!
Equip# SP-3180, Ser# 256499, Deutz F3L-1011 3 cyl. diesel engine, RH Controls, hydraulic brakes. Pulls spikes from both sides of one rail, adjustable for different spike patterns and rail heights. Can be set to pull spikes completely or partially. Also pulls “hairpin” spikes! Manual hyd. transfer pump, travel protection bumpers, dual oil and hyd. drains, side mounted mirrors, running lights, live track sign. Dimensions: (Approx.) L. 12’ 8”, W. 8’, H. 8’, Wt. 5,800 lbs. Located Arcola, IL
Fairmont W113-D Dual Spike Puller    PHOTOS    FOR SALE OR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# SP-2080, Ser# 255209, 1986 Model, RH controls, two cyl. Deutz diesel engine, roof, four wheel drive, remote pattern change, turntable. Dimensions: (Approx.) L. 10’6”, W. 6’9”, H. 7’, Wt. 4,860 lbs. Located Arcola, IL
Fairmont W122-A-1 Spiker/Gauger    PHOTO    $5,500.00
Equip# SD-2950, Ser#254070, 1985 Model, Deutz F3L-912 three cyl. diesel engine, turntable, remote pattern change. Drives spikes both side of one rail. Dimensions: (Approx.) L.14’, W. 8’4”, H. 6’7”, Wt. 13,500 lbs. Cost when sold new $122,000.00. Located Arcola, IL. Sold "as is".
Nordco SS-B Spiker     PHOTO    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# SP-3285, 2006 Model, John Deere Diesel engine, CX Style Reciprocating Hammers with nippers, gaging attachment.. A Modular design for simple operating and maintenance. Manual hydraulic controls improve reliability and troubleshooting! Machine has remote Hydraulic spike pattern adjustment, boom & winch for loading spike kegs, four wheel drive, turntable, Bumpers, tow bar with hitch pins, strobe light, work & travel lights, fire extinguisher, West Coast mirrors, bi-directional high & Lo tone horns, hourmeter, cycle count and keyed ignition switch. Dimensions: (Approx.) L.18’, W. 8’ 6”, H. 8’6”, Wt. 17,700 lbs. Located Arcola, IL
Nordco “Grabber” Dual Spike Puller     PHOTO    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# SP-3275, Model LS Grabber, 1993 Model, Ser# 457, Deutz F3L-912 3 cyl. diesel engine. Pulls inside and outside spikes simultaneously on both rails. One or two man operation. Dimensions: (Approx.) L. 14’, W. 7’, H. 7’6”, Wt. 7,500 lbs. Located Arcola, IL
Nordco “Claws” Spike Puller    PHOTO    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# SP-3280, Model LS Claws, 1993 Model, Ser# 417, Deutz F3L-1011 Diesel engine. Pulls inside and outside spikes simultaneously on one rail. One man RH controls.. Lights, strobe, mirror, back-up alarm. Dimensions: (Approx.) L. 9’, W. 7’, H. 7’6”, Wt. 4,000 lbs. Located Arcola, IL
Fairmont W84-J Single Hydraulic Spike Puller    PHOTO    FOR SALE OR RENT!
Equip# SP-3560, traversing head. New paint, serviced and ready to work! Dimensions: (Approx.) L. 4’, W. 9’, H. 4’ 6”, Wt. 1200 lbs. Located Arcola, IL


Nordberg CHP Single Hydraulic Spike Puller    PHOTO    CALL!
gas engine, traversing pulling gun. Dimensions: (Approx.) L. 4', W. 7'9", H. 4'1", Wt. 700 lbs. Located Arcola, IL


TIE CRANES

Kershaw 12-4 Tie Crane    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# TH-2340, TH-118, 1986 Model, Rebuilt GM 3-53 diesel engine (As of 3/06), 5969 total hrs. enclosed cab, new swing gear, heater, updated Gresen hydraulic joysticks! 800 lbs. capacity at 24 ft. Single tie head. (Grapple head available), lights, air horn. Good paint! Dimensions: (Approx.) L. 18’2”, W. 7”, H. 9’, Wt. 12,340 lbs. Located Arcola, IL
Kershaw 12-1 Tie Crane    PHOTOS    $5,500.00
GM 3-53 diesel engine, open cab, stiff boom, dual tie head, air brakes. Fair condition. Located Arcola, ILL. “As is, where is”
Kershaw 11-2 Tie/Bridge Crane    PHOTOS    "As Is" $7,500
Ser# 11-140, GM 3-53 diesel engine, open cab, articulating boom, rail clamps have been removed! Grapple head assembly, air brakes, air horn, lights, strobe. Good condition. Located Arcola, IL
RTW TH-2170A Articulating Tie Crane    SALE PRICE $24,500
Equip# TH-3055, Ser# 372, GM 3-53 diesel engine, air dryer, air horn, articulating boom, air/over hydraulic brakes, grapple tie head, extra fuel tank, lights, strobe, enclosed cab, wipers. Dimensions: (Approx.) L. 28’, W. 7’4”, H. 8’ w/boom extended! Wt. 10,500 lbs. Located Arcola, IL
RTW TH-2181-B Articulating “Tie/Bridge Crane"        PHOTOS    FOR SALE OR RENT - - CALL FOR AVAILABILITY!
Equip# TH-2875, Ser# 154, GM 3-53 diesel engine, air horn, articulating boom, air brakes, dual sliding tie head, rail clamps, hydraulic winch, enclosed cab, heater, engine enclosure, lights, beacon. Dimensions: (Approx.) L. 28’, W. 7’4”, H. 8’ w/boom extended! Wt. 10,000 lbs. Located Arcola, IL
RTW TH-2181-B Articulating "Tie/Bridge Crane"    PHOTOS    FOR SALE OR RENT- - CALL FOR AVAILABILITY!
Equip# TH-2190, Ser# 167, Deutz 4FL-912 Diesel engine, over center clutch disconnect for easy starting, enclosed cab, new air conditioning/heating unit, lights, wipers, horn, strobe, new Dodge Gear box, new hydraulic pump, air brakes, rail clamps, dual tie head, hydraulic winch with 150’ of 5/16” cable with 8000# pulling force mounted under base boom section. Lifting capacity 800 lbs @ 24’, 1500 lbs. @ 12’6”. Dimensions: (Approx.) L. 27’6”, W. 7’4”, H. 8’, Wt. 11,500 lbs. Located Arcola, IL


RAIL-LIFTERS / LINERS

Nordco AutoLift Rail Lifter    PHOTO    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Model LS, Equip# RL-3160, 1997 Model, Ser# 600. Hatz Diesel engine. AutoLift Rail Lifter will automatically lift one or both rails to a specific height to allow positioning the tie plates between the ties and the rail. It is self propelled and 2 person operation. New paint! Dimensions: (Approx.) L. 6’, W. 6’, H. 6’, Wt. 4,500 lbs. Located Arcola, IL
Nordco AutoLift Rail Lifter    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Model LS, Equip# RL-3165, 1997 Model, Ser# 575. Hatz Diesel engine. AutoLift Rail Lifter will automatically lift one or both rails to a specific height to allow positioning the tie plates between the ties and the rail. It is self propelled and 2 person operation. New paint! Dimensions: (Approx.) L. 6’, W. 6’, H. 6’, Wt. 4,500 lbs. Located Arcola, IL
Fairmont W111-B-3 Track Liner    PHOTOS    CALL!
Equip# TL-2375, 1982 Model, GM 3-53 diesel, 900 hrs. with Fairmont W120 wire lining system. Dimensions: (Approx.) L. 12”, W. 6’, H. 10’, Wt. 9,000 lbs. Located Arcola, IL
Geismar RVD Power Jack Liner     PHOTOS    SALE OR RENT!
Equip# RLL-2965, Ser# 581, Diesel engine. Great for small undercutting jobs and pre-lining new construction. Dimensions: (Approx.) L. 6’, W. 9’, H. 5’10”, Wt. 2600 lbs. Located Arcola, IL
TIE REMOVERS / SCARIFIERS / INSERTERS

Fairmont Tamper TR-10 Phase III Tie Exchanger     PHOTOS   FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Phase III Machine, Equip TRI-2930, Ser# 5592328, 1998 Model, Cummins Diesel engine, 4300 total tach hrs., air throttle, air dryer, Visionaire air conditioning, wide cab. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Wide cab with rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics, (2) high pressure hydraulic filters. Removes and inserts 6-8 ties per minute! Fuel capacity 120 gallons (17 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, beacon air horns, back-up alarm, side mirrors. Very good machine! Dimensions: (Approx.) L. 32’, W. 10’4”, H. 10’8” (11' on 4x4 wheel blocks), Wt. 35,000 lbs. Located Arcola, IL
Fairmont Tamper TR-10 Tie Exchanger    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Phase III Machine, Equip# TRI-2720, Ser# 5592026, 1996 Model, Cummins Diesel engine, air throttle, air dryer, Visionaire air conditioning, wide cab. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Wide cab with rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics. Removes and inserts 4-6 ties per minute! Fuel capacity 120 gallons (17 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers. Very good machine! Dimensions: (Approx.) L. 32’, W. 10’4”, H. 10’8” (11’ on 4x4 wheel blocks), Wt. 35,000 lbs. Located Arcola, IL
Fairmont Tamper TR-10 Tie Exchanger    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Phase III Machine, Equip# TRI-3385, Ser# 5591603, 1993 Model, Detroit 4-53T Diesel engine, wide cab, Hupp roof top air conditioner. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Wide cab with rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics, two high pressure filters. Extractor/Inserter tube assembly, rail clamp assembly removed and completely rebuilt and updated 5/1/07. All work done by JER Overhaul, Inc. New rail wheels! Removes and inserts 4-6 ties per minute! Fuel capacity 120 gallons (17 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers. Air horns, back-up alarm, beacon, side mirrors. Manual hyd. Top-off pump, electric emergency pump. Dimensions: (Approx.) L. 32’, W. 10’4”, H. 10’8” (11’ on 4x4 wheel blocks), Wt. 34,000 lbs. Located Arcola, IL
Fairmont Tamper TR-10 Tie Exchanger    IN SHOP! FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Phase III Machine, Equip# TRI-3520, Ser# 5591392, 1992 Model, Detroit 4-53T Diesel engine, wide cab, Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Wide cab with rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics. Removes and inserts 4-6 ties per minute! Fuel capacity 120 gallons (17 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers. Air horns, back-up alarm, beacon, side mirrors. Dimensions: (Approx.) L. 32’, W. 10’4”, H. 10’8” (11’ on 4x4 wheel blocks), Wt. 34,000 lbs. Located Arcola, IL
Fairmont Tamper TR-10 Tie Exchanger    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Phase III Machine, Equip# TRI-3395, Ser# 5590990, 1990 Model, Detroit 4-53T Diesel engine, wide cab, 24 volt system. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Wide cab with rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics. Removes and inserts 4-6 ties per minute! Fuel capacity 120 gallons (17 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, jump seat, hand hyd. transfer pump, heater, insulated cab, back-up alarm. Dimensions: (Approx.) L. 32’, W. 10’4”, H. 10’8” (11’ on 4x4 wheel blocks), Wt. 35,000 lbs. Located Arcola, IL
Fairmont Tamper TR-1 Tie Exchanger    PHOTOS    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip# TRI-3265, Ser# 5580676, 1986 Model, Deutz 6 cyl. Diesel engine. Updated hydraulic valves and manifolds, TR-10 style tilt heads. Clamp frame assy. rebuilt, rebuilt Extractor/Inserter Tube assembly. Lots new wiring and hoses, BTI Tie clamp fingers, new drive sprockets, good wheel flanges. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics. Removes and inserts 4-6 ties per minute! Fuel capacity 75 gallons (12 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, mirrors, strobe, back-up alarm. Very good machine! Dimensions: (Approx.) L. 30’, W. 9’ 2”, H. 9’6” (11’ on 2x4 wheel blocks), Wt. 35,000 lbs. Located Arcola, IL
Fairmont Tamper TR-1 Tie Exchanger    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip# TRI-3400, Ser# 5580405, 1985 Model, GM 4-53T turbo diesel engine, TR-10 Style Extractor/Inserter head assy. Good wheel flanges. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics, (1) high pressure filter, electric hyd. Top-off pump system. Removes and inserts 4-6 ties per minute! Fuel capacity 75 gallons (12 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, mirrors, strobe, back-up alarm, air dryer, side & rear view mirrors, heater, defrosting fans. Very good machine! Dimensions: (Approx.) L. 30’, W. 9’ 2”, H. 9’6”, Wt. 34,000 lbs. Located Arcola, IL
Fairmont Tamper TR-1 Tie Exchanger    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip# TRI-3405, Ser# 5580074, 1984 Model, GM 4-53T turbo diesel engine, 6383 hrs. as of 1/15/07. TR-10 Style Extractor/Inserter head assy. Good wheel flanges. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics, two high pressure filters, electric emergency pump, air dryer. Removes and inserts 4-6 ties per minute! Fuel capacity 75 gallons (12 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, side mirrors & rear view mirror, fire extinguisher, strobe, back-up alarm, heater Good machine! Dimensions: (Approx.) L. 30’, W. 9’ 2”, H. 9’6”, Wt. 34,000 lbs. Located Arcola, IL
*Fairmont Tamper TR-1 Tie Exchanger    FOR SALE OR RENT -- CALL FOR AVAILABILITY!
Equip# TRI-3350, Ser# 5580264, 1984 Model, GM 4-53T turbo diesel engine, 2606 hrs. as of 10/05/06. TR-10 Extractor/Inserter head assy. Good wheel flanges. Hydrostatic driven four wheel drive. Removes ties from either side, and maintains track alignment. Handles switch ties with ease! Rail mounted operator’s seat traverses from side to side as required. Swivel head, rail clamps, load sensing hydraulics. Removes and inserts 4-6 ties per minute! Fuel capacity 75 gallons (12 hrs. working time), 20 m.p.h. travel speed. Work & travel lights, wipers, mirrors, strobe, back-up alarm. Very good machine! Dimensions: (Approx.) L. 30’, W. 9’ 2”, H. 9’6” (11’ on 2x4 wheel blocks), Wt. 35,000 lbs. Located Arcola, IL
Kershaw 44-1 Rotary Scarifier/Inserter    PHOTOS        FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# RTBS-2940, GM 3-53 Diesel, air conditioned enclosed cab, kicker attachment. Turntable, air brakes, lights, air horns, beacon, four wheel drive. Dimensions: (Approx) L. 20’, W. 12’2” traveling position ( 9’8” with extension drums removed and hyd. cylinders retracted), H. 9’, Wt. 16,500 lbs. Machine has recently gone thru a major overhaul! Located Arcola, IL
Kershaw 44-1 Rotary Scarifier/Inserter        FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# RTBS-3500, Ser# 44-156-89, 1989 Model, GM 3-53 Diesel, enclosed cab, kicker attachment. Turntable, air brakes, lights, air horns, beacon, four wheel drive. Dimensions: (Approx) L. 20’, W. 12’2” traveling position ( 9’8” with extension drums removed and hyd. cylinders retracted), H. 9’, Wt. 16,500 lbs. Located Arcola, IL


ADZERS / CRIBBERS

Nordco ROA-B Rail Gang tie adzer    PHOTOS    FOR SALE OR RENT - CALL FOR AVAILABILITY!
Equip# ADZ-2095, 1997 Model, Ser# 187, 1135 total hrs. Machine reconditioned 11/04. Deutz 4 cyl. Diesel engine, approx. 130 FPM crawler speed. Maximum stability crawler unit spans seven ties. Proven Nordco 20” cutter head with chain safety guard. Has optional debris collector to minimize dust and debris in operator area! Very nice with recent paint! Dimensions:(Approx.) L.13’, W. 8’6”, H. 6’, Wt. 5075 lbs. Located Arcola, IL
RTW DBC Dual Ballast Cribber    PHOTOS    FOR RENT ONLY - CALL FOR AVAILABILITY!
Equip# BCR-3470, GM 3-53 Diesel. One man operated self-propelled machine that prepares the way for out-of-face, automatic or hand anchor applications. Removes ballast within the eye of the crib, under the base of the rail to a depth of 6 inches. Cribs both rails simultaneously, averaging four ties per minute. Ballast removal normally requires one pass. Dimensions: (Approx)L. 15’, W. 8’, H. 8’, Wt. 12,000 lbs. Located Arcola, IL
RTW DWDS-D6 Rail Gang Anchor cribber    PHOTOS    CALL!
1980 Model (Updated), Ser#491. Diesel engine powered! Anchor cribber removes ballast 6 inches below top of tie. Two tie end sweeps clear loose ballast to facilitate adzing. Self propelled single operator with speeds of 20-80 feet per minute. Dimensions: (Approx.) L. 10’6”, W. 8’4”, H. 5’4”, Wt. 5,780 lbs. Located Arcola, IL
Fairmont/RTW 203-A-1-1 Rail Gang Anchor cribber    CALL!
1996 Model, Ser#257104. Diesel engine powered! Anchor cribber removes ballast 6 inches below top of tie. Two tie end sweeps clear loose ballast to facilitate adzing. Self propelled single operator with speeds of 20-80 feet per minute. Very nice! Dimensions: (Approx.) L. 10'6", W. 8'4", H. 5'4", Wt. 5,780 lbs. Located Arcola, IL


Rail Anchor Machines

Racine Dual Anchor Spreader        FOR RENT ONLY -- CALL FOR AVAILABILITY!
Model DAS    PHOTOSModel DAS, Equip.# DAS-3155, Ser# DAS-188-06, New 2006 Model, Hatz Model 3L41C diesel engine, 225 hrs. total. The Spreader will spread all types of rail anchors when utilized in a wood tie replacement gang. Ties must be removed prior to Spreading! Rail anchors do not have to be removed and reapplied during this operation when used in conjunction with a Racine Dual Anchor Adjuster! A production rate of 4-6 ties per minute can be reached. Travel lights, Strobe light, turntable, steel roof, air brakes, air dryer, (4) Rubber safety bumpers, Schroeder test stations, return hydraulic filter, emergency pump, remote axle lube, back-up alarm, dual horns, mirrors, lockable vandalism covers, jump seat, noise abatement engine enclosure, spark arrestor. Dimensions(Approx.) L. 186”, W. 96”, H. 10’4”, Wt. 10,700 lbs. Very good condition! Located Arcola, IL
Racine Dual Anchor Spreader    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Model DAS, Equip# 2325, Ser# DAS157-97, Unit RA-6 (4011) 1997 Model, Deutz F3L-1011 diesel engine. The Spreader will spread all types of rail anchors when utilized in a wood tie replacement gang. Ties must be removed prior to Spreading! Rail anchors do not have to be removed and reapplied during this operation when used in conjunction with a Racine Dual Anchor Adjuster! A production rate of 4-6 ties per minute can be reached. Travel lights, turntable, steel roof, air brakes, vandalism covers, jump seat, noise abatement engine enclosure. Dimensions(Approx.) L. 186”, W. 96”, H. 104”, Wt. 10,700 lbs. Very good condition! Located Arcola, IL
Racine Dual Anchor Adjuster    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Model DAA, Equip# 2320, Ser#DAA160-93, Unit RA-5 (4041), 1993 Model, Deutz F3L-1011 diesel engine. The Dual Anchor Adjuster will squeeze all types of rail anchors when utilized in a wood tie replacement gang; or to re-tighten rail anchors in a surfacing gang operation; or during rail replacement. Rail anchors do not have to be removed and reapplied during wood tie replacement operations. A production rate of 8-10 ties per minute can be reached. Travel lights, turntable, air brakes, vandalism covers, noise abatement engine enclosure, steel roof, jump seat, side mirrors, top off pump assy., back-up alarm, pre-cleaner air filter. Dimensions: ( Approx) L. 186”, W. 87”, H. 93”, Wt. 8000 lbs. Located Arcola, IL
Racine Dual Anchor Adjuster, Model DAA    PHOTO    RENT ONLY! CALL FOR AVAILABILITY!
Model DAA, Equip# 2460, Ser# DAA120-91, 1991 Model, Deutz F3L-1011 diesel engine. The Dual Anchor Adjuster will squeeze all types of rail anchors when utilized in a wood tie replacement gang; or to re-tighten rail anchors in a surfacing gang operation; or during rail replacement. Rail anchors do not have to be removed and reapplied during wood tie replacement operations. A production rate of 8-10 ties per minute can be reached. Travel lights, turntable, air brakes, vandalism cover, noise abatement engine enclosure, steel roof, side mirrors, back-up alarm, pre-cleaner air filter. Dimensions: ( Approx) L. 11’, W. 8’4”, H. 8’10”, Wt. 8100 lbs. Located Arcola, IL
Racine DAT Dual Anchortight    PHOTO    $2,500.00
Perkins 4 cylinder diesel engine. Fair to Poor condition. Dimensions: (Approx.) L.107”, W. 84”, H. 87”, Wt. 4,000 lbs Located Arcola, IL. “As is”


OTHER MACHINES
“Tamper” Highway Trailer    PHOTO    "As is, where is" $3,500.00
36,000 lb. gross load capacity, six axles, 12 wheels, loading ramp kit. Originally designed for hauling and unloading “Vibratool Tampers” and “GO-4 Trac-Gopher Undercutter” . Dimensions: (Approx.) L. 25’ 6”, W. 8’, H. 2’4’. Fair condition. Located Arcola, IL
New Heavy Duty Flatcar    PHOTO    $6,500.00
18,000# capacity, 10' x 68" steel deck, 16" wheels. Located Arcola, Illinois.
(3) New 10,000 lbs. Steel Flatcars    PHOTO    CALL!
67 inch by 84 inch deck, 16 inch wheels. Located Arcola, IL
Used 10,000 lbs. + plus! Flatcar!s    PHOTO    $3,800.00
50 inches wide, 8 feet 4 inches long, 16” wheels. Has tool box on one end leaving 7 feet open deck. Car is made of 4 inch steel tubing with open deck. Its a nice car! Ready to go! Located Arcola, IL
Geismar AP-21-T6 Clipper    PHOTOS    $14,500.00
Ser# 1296, B&S gas engine, Interchangeable workheads for different style clips. Works on new or old Pandrol clips. Installs up to 1600 clips per hour, inserts clips on wood or concrete ties, works on either side of rail. Easily removes all clips on concrete ties. Units currently have T6 heads for installing Fastclip, Safelok/McKay, Surlock chips. Also removes Fastclip! Extra head for "E" clips available. Good condition. Located Arcola,IL
Geismar AP-21-T6 Clipper    PHOTOS    $14,500.00
Ser# 1332, B&S gas engine, Interchangeable workheads for different style clips. Works on new or old Pandrol clips. Installs up to 1600 clips per hour, inserts clips on wood or concrete ties, works on either side of rail. Easily removes all clips on concrete ties. Units currently have T6 heads for installing Fastclip, Safelok/McKay, Surlock chips. Also removes Fastclip! Extra head for "E" clips available. Good condition. Located Arcola,IL
(2) Geismar AP-21-T5 Clipperst    $14,500.00
1996 models. New B&S gas engines, Interchangeable workheads for different style clips. Works on new or old Pandrol clips. Installs up to 1600 clips per hour, inserts clips on wood or concrete ties, works on either side of rail. Easily removes all clips on concrete ties. Units currently have T5 heads for removing “Pandrol Safelock” clips! Extra head for "E" clips available. Good condition. Located Arcola,IL
Geismar AP-21-T2 Clipper    $10,500.00
Ser# 1257, B&S gas engine, Interchangeable workheads for different style clips. Installs up to 1600 clips per hour, inserts clips on wood or concrete ties, works on either side of rail. Easily removes all clips on concrete ties. Units currently have T2 heads for installing Two "E" clips. Good condition. Located Arcola,IL
Jackson LO Hand Tamper Set    PHOTO    $6,750.00 each
Generator with (4) LO hand tampers. Very good condition! Located Arcola, IL
Jackson LO Hand Tamper only!    from $600
"As is" or rebuilt.
Kershaw Safelok Klip Remover    PHOTOS    CALL!
Model 9-1, Ser# 9-133-93, Model 1993, B&S 11 h.p. gas engine. Removes Safelok rail clips from concrete tie at a rate up to 800 ties per hour. Machine is self-propelled. Wt. 1,100 lbs
Kershaw Safelok Klip Removerr    CALL!
Model 9-1, Ser# 9-115-90, Model 1990, B&S 11 h.p. gas engine. Removes Safelok rail clips from concrete tie at a rate up to 800 ties per hour. Machine is self-propelled. Wt. 1,100 lbs
Rail Manipulator, Racine AM Converted by UP-Denver    PHOTO    CALL!
Equip# RM-2995, Ser# AM-300-93, Deutz Diesel engine. Designed to install insulators under Pandrol Clips. Dimensions: (Approx.) L. 16", W. 7'2", H. 9'10", Wt. 9,200 lbs. Located Arcola, IL
Racine/CSX Modified Rail Manipulator    CALL!
Equip# RM-3135, Diesel engine. Designed to install insulators under Pandrol Clips. Very good condition! Located Arcola, IL
Racine Mark II "Trak-Skan" Track Geometry Trailer    PHOTO    $10,500.00
Measures gage and elevation only! Like new condition. Located Phoenix, AZ
Tamper “Power Unit”    PHOTOS    CALL!
Vibratool chassis used to pull multiple flatcars, personnel carrier, hydraulic power source! Has many uses! GM 3-53 diesel engine, three speed transmission, four wheel air brakes! Located Arcola, IL
Teleweld CWR Series I Rail Heater with vibrators    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Model RB1, Equip.# RH-3390, Ser# 3208, 1995 Model, Deutz Diesel engine, self-propelled, 400 gallon tank, 32 burner dual sided and dual vibrators. Second heater unit to heat opposite rail without turning unit. Rail vibrators capable of producing 3600 cycles per minute with 440 pounds of force. Dimensions: L.23’ 7”’, W. 7’ 6”, H. 9’, Wt.13,000 lbs
Teleweld CWR Series I Rail Heater with vibrators    PHOTOS    FOR RENT -- CALL FOR AVAILABILITY!
Model KL4, Equip.# RH-2985, Ser# 3146, Deutz Diesel engine, self-propelled, 500 gallon tank, 32 burner dual sided and dual vibrators. Second heater unit to heat opposite rail without turning unit. Rail vibrators capable of producing 3600 cycles per minute with 440 pounds of force. Dimensions: L.23’ 7”’, W. 7’ 6”, H. 9’, Wt.13,000 lbs
Teleweld CWR Series I Rail Heater with vibrators    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Updated in 2001 to Model RM4, Ser# 3035, 3 Cyl. Deutz Diesel engine, self-propelled, 500 gallon tank, 32 burner dual sided and dual vibrators. Second heater unit to heat opposite rail without turning unit. Rail vibrators capable of producing 3600 cycles per minute with 440 pounds of force. New paint! Dimensions: L.23’ 7”’, W. 7’ 6”, H. 9’, Wt.13,000 lbs
Teleweld CWR Rail Heater    PHOTOS    FOR RENT ONLY -- CALL FOR AVAILABILITY!
Equip# RH-3110, Ser# 15635-1, 32 burner dual sided. Approx. 400 gallon propane tank. New Brass burner screens, new gaskets, new crucible bottom’s. Towable, not self-propelled, 6 ft. tow bar with safety cable. Has fail safe air brakes with quick dump & glad hand connections. No vibrators. Excellent condition. Dimensions: L.13’, W. 7’ 6”, H. 8’ 6”, Wt.4,000 lbs. Located Arcola, IL
Teleweld Series II Rail heater with vibrator    PHOTOS    FOR RENT ONLY! -- CALL FOR AVAILABILITY!
Equip# RH-2315, Model QL1, Ser#3207, 1994 Model. Two cylinder 18 h.p. Honda propane engine. Eight burner, single sided, self-propelled. Uses (4) 100# propane tanks. Unit does not come with tanks! Good condition. Recent paint! Dimensions: L.13’6”, W. 7’, H. 7’, Wt.3,200 lbs Located Arcola,IL
Teleweld CWR Series II Rail Heater with vibrator    FOR RENT -- CALL FOR AVAILABILITY!
Model QL1, Equip# RH-3475, Ser# 1350, 1990 Model. Two cylinder Deutz F2l-1011 Diesel engine. Eight burner, single sided, self-propelled. Uses (4) 100# propane tanks. Unit does not come with tanks! Good condition. New paint. Dimensions: L.13’6”, W. 7’, H. 7’, Wt.3,200 lbs Located Arcola,IL


MOTOR CARS AND HI-RAIL PICKUPS/TRUCKS

1995 Ford L8000 (3) Axle Twin Screw “Wheel Change Truck”,         PHOTOS        $29,900
#96036, (no hi-rail!) Vin# 1FDYW82E8SVA76043, 372.135 miles, Cummins 8.3 Turbo-charged diesel engine, 5 –speed MD-3060/MD-3560 automatic transmission, 54,600 GVWR, 14,600 front axle, 40,000 rear axles, extended cab, (2) front air ride seats, (1) rear jump seat, very clean inside cab! Air conditioning AM/FM radio, air horn, spot light work lights. (2) 50 gal. diesel saddle tanks, (3) tool boxes built in to front bumper area, 11R22.5 tires fair to good condition, spare tire mounted by crane. Has FBE Truck Body, two tall tool boxes behind cab, right side set up for torch with take reel for acetylene hose. All tool boxes in good condition with lockable handles. Has 12’ deck space, set-up to carry 2-3 axles w/ tie downs. Has stairs on right side to access flatbed area. Has rear mounted center heavy duty winch, remote control valve assy. for hydraulic jacks (no jacks attached). National N85 Articulating folding crane, will lift 14,400 lbs. @ 6’ 3”, 6,600 lbs. @ 12’ 3”, 4,800 lbs. @ 16’ 3”, 3,600 lbs. @ 20’ 6”, 3,000 lbs. @ 24’ 6”, 2,600 lbs. @ 28’ 6”. This is an exceptionally clean & mechanically sound truck! Truck is 35’ long, 8’ 6” wide and 11’ high. Located Phoenix, AZ
(5) New Fairmont #77179K Rubber Tread Wheels    PHOTOS    $300.00 Each
assembled with new hub, bolts and bearings!
(4) Fairmont #77179K Rubber Tread Wheels    PHOTOS    $175.00
80% flanges and rubber tread!
Fairmont A4-D Gang Car    PHOTO    $2,500.00
CN188-93, Ford 4 cyl. gas engine, 4-speed transmission, reversing differential, roof badly damaged. Runs good! Located Arcola, IL
Fairmont A4-D Gang Car    IN SHOP!
Equip# MC-3225, Lister Diesel engine, 4-speed transmission, reversing differential, roof and windshield. Dimensions: (Approx.) L. 9’ 2’, W. 64”, H. 60”, Wt. 2250 lbs. Located Arcola, IL
Fairmont A4-D Gang Car    PHOTOS    $3,500.00
Ford 2.3L 4 cyl. (Pinto) gas engine, 4-speed transmission, reversing differential, roof and windshield. Runs good! Dimensions: (Approx.) L. 9' 2', W. 64", H. 60", Wt. 2250 lbs. Located Arcola, IL
Fairmont A4-D Gang Car    PHOTOS    $1,200.00
Car# 246975, Equip.# A4-2300, Ford 2.3L 4 cyl. (Pinto) gas engine, 4-speed transmission, reversing differential, roof and windshield. No radiator, no fan, no starter, no distributor, no fuel tank. Has alternator and carburetor. Brake system complete, has back-up alarm, (4) good wheels, lifting frame, (2) late style wiper motors with blades, has tool box. (1) front glass good, (1) broken, rear glass cracked. Dimensions: (Approx.) L. 9’ 2’, W. 64”, H. 60”, Wt. 3250 lbs. Located Phoenix, AZ. “As is, where is”
Fairmont RO-C Engine    PHOTOS    $2,000.00
5-9 h.p., Engine # 114306, Rebuilt! Water hopper with condenser, timer, mounting. Bracket for 12V Alternator. No carburetor! Located Phoenix, AZ
Fairmont OD-B Engine    PHOTOS    $900.00
5-9 h.p.. Water hopper with condenser, timer, 6V generator. No carburetor! Was a good running engine when removed from M19 Car. Located Phoenix, AZ


Please call prior to inspection for exact location of equipment. Pictures available upon request. Prices subject to change without notice. Taxes apply where applicable.

JER Overhaul, Inc.
Office: (602) 952-0035
Phone/Fax: (602) 952-6026
Mobile: (602) 549-0950
Website: www.newmanmachinery.com
Related Links: www.jeroverhaul.com
www.nordco.com